Custom curtains & blinds across Singapore

Blinds for a Rental Home When You Cannot Drill

You rent the room. The tenancy agreement limits holes in the walls. The window faces the next block, and you want a blind rather than a curtain. Start with what is already fixed to the window, then with what that agreement allows.

There is no official page we can cite that sets a national rule for drilling blinds into a rented flat. Permission is whatever your agreement says, and whatever the landlord confirms in writing. A verbal “should be fine” is a weak thing to rely on when the deposit is at stake.

The photograph at the top is a curtain on a rod in a recess, which is the curtain version of the same problem. The guide to hanging curtains without drilling covers tension rods, adhesive and clamps for cloth. This page is the blind version, including the point where a made-to-measure blind still needs screws.

Look at the window before you buy hardware

A previous tenant may have left brackets, a head rail or a roller that is still sound. If the fixing is firm and the blind runs straight, you may not need a new hole at all.

A recess, with solid wall on both sides, is what makes a tension fit possible. A flat wall above the window does not. A curtain box or pelmet can also give two sides to push against. The pelmet guide explains the box. The inside or outside mount guide explains the recess a blind needs even when you are allowed to drill.

If none of that is there, the choice is a landlord’s permission for brackets, or a blind you do not screw in, with the limits below.

Tension fits, clips and adhesive

A tension blind works like a tension rod. You extend it until it presses against the two sides of the recess. It needs those two sides. It will not hold on a bare wall. Every product states a maximum span and a weight. Stay under both. The longer the span, the more the bar sags and the easier a tug pulls it down.

Keep the cloth light. A sheer or a light sunscreen fabric is the realistic load. A coated blackout on a wide bedroom window is often too heavy for the same reason a lined blackout curtain is too heavy for a tension rod. The curtain guide says that in more detail.

Clip-on or clamp brackets grip a frame lip that matches the clamp’s range. Fix them to a part of the frame that does not move. A casement sash has to open and lock. A clamp on that sash, or a blind that stops the handle turning, is the wrong place. The handle clearance guide shows why the handle needs space even for a normal curtain.

Magnetic rods need steel. The curtain guide notes that many HDB frames are aluminium, which a magnet does not hold. Check the frame with a magnet before you order one.

Adhesive hooks, brackets and stick-on rails state a weight for a load that hangs still. Lowering and raising a blind adds a pull the pack may not have tested in a humid room. Heat on an afternoon wall, and steam in a kitchen or bathroom, can let adhesive creep weeks after it seemed firm. Paint can lift when you take it off. Ask the landlord before anything is stuck to a painted surface. Use the span and weight printed on the pack you buy.

Do not drill the window

Window frames, stays and safety barriers are not a convenient beam for a blind.

The Building and Construction Authority’s windows page says installing and retrofitting windows is work for an approved window contractor and a trained window installer. HDB’s window care page says window works in HDB flats may only be performed by BCA-approved window contractors listed with HDB, who report the work when it is finished. Those pages are about the window. They are not a blind-installation rule, and they are not permission to screw a bracket into a casement. Leave the frame, the rivets and any safety barrier alone.

A blind bracket, when it is allowed, goes into the wall or the ceiling beside the frame, or the blind is a tension fit inside the recess.

If the landlord agrees to screws

Then a normal made-to-measure blind is possible. We supply and install bracket-fixed blinds, including roller blinds. We do not list tension-fit or adhesive blinds as products we keep. If you ask us to fit a blind, the visit is for brackets, and we need the written agreement first.

The blind is cut for the opening we measure. The blind size calculator turns width and drop into square feet for a quote. When you move, that blind often will not fit the next window. A tension fitting you bought for a similar recess is the piece more likely to come with you, and only if the next opening is a similar width. Agree in writing who patches the holes, and keep the reply.

If drilling the wall is allowed, the curtain guide also notes HDB limits for ferrolite bedroom partitions and for household shelters. Follow those. They are about the wall, not a reason to use the window frame instead.

Children and visiting grandchildren change the hardware question. A looped cord in a rented room is the same hazard as in a home you own. The blind cord safety guide explains tension devices, and why a cordless or motorised blind removes the loop rather than asking someone to wind a cord up every time. Families for Life says to keep blind and curtain cords tied up, secured out of reach, or replaced with cordless alternatives. A cleat only helps if someone winds the cord every time. Cordless removes the loop.

Privacy still has to be real

A light tension screen in a recess faces the next block the way any sunscreen does. After dark, with the lights on, an open weave can be seen through. Sunscreen blinds at night explains that, and it applies to a temporary blind as much as to one we fit. A bathroom or a ground-floor room needs a cloth that does not stay see-through, and a tension fit may not carry that cloth. If the landlord will not allow brackets, a curtain on a tension rod in the recess may be the heavier option the opening can hold. The curtain guide’s weight limits still apply.

Common questions

Can I hang a blind in a rented room without drilling?

Sometimes. A recess with solid sides can hold a light tension blind if you stay inside the span and weight printed on that product. A flat wall cannot. Anything screwed into the wall needs the landlord’s agreement. We fit bracket-fixed blinds. We do not supply the no-drill hardware.

Will a made-to-measure blind move to the next flat?

It is cut for one opening. A different width or a different recess usually means a new blind. Say that to the landlord when you ask about screws, so the cost of a blind you cannot reuse is part of the decision.

Can Curtains SG install before the landlord replies?

No. If the agreement restricts holes, we need the written permission before a bracket installation is booked. Photos of the window still help us say whether a recess could take a tension fit you buy yourself.

Are stick-on blinds a good idea in a bathroom?

Bathrooms stay damp, and adhesive fails sooner on a damp wall. A bathroom also needs night privacy, which a light open-weave blind does not give. The bathroom blinds page is the product side of that, once you know what you are allowed to fix.

Chat on WhatsApp